News: Don't Forget to check out the main page for updates! http://www.vegasdrift.com
Pages: [1]
« previous next »
  Print  
Author Topic: rear subframe bushings  (Read 684 times)
0 Members and 1 Guest are viewing this topic.
roms
*
Posts: 32
« on: February 25, 2011, 09:07:21 PM »
Hey..jus had a question.hopefully someone on here can help me out ..does anybody know if the rear subframe bushings are the same for s13 and s14?    Thanks
Logged
gangster240
*
Posts: 81
« Reply #1 on: February 25, 2011, 11:32:09 PM »
 What you buying ES bushings subframe bushings?  If so then yes.
Logged
1slows13
Limit Break
Vegasdrift
****
Posts: 162
« Reply #2 on: February 26, 2011, 12:18:10 PM »
I think it's slightly different. Because you need offsetted bushings to put an s14 subframe on a 13
Logged
Dook-E
Vegasdrift
****
Posts: 1566


Because Drift Car
« Reply #3 on: February 26, 2011, 12:21:35 PM »
yeah they are different. you can see here that SPL makes conversion bushings and they are offset.

http://splparts.com/store/product-info.php?pid15.html
Logged
gangster240
*
Posts: 81
« Reply #4 on: February 26, 2011, 04:37:48 PM »
 From what I read I understood he just wants to know if s14 subframe bushings fit a s13. I'm a bad reader so I don't know if I'm right  Grin       http://www.phase2motortrend.com/ensusupibus1.html    And I don't know if theres much difference on the bushings but I bought  Energy Suspension s14 subframe bushings and they fit my s13.     Disregard everything I said if I'm wrong  Tongue
Logged
roms
*
Posts: 32
« Reply #5 on: February 28, 2011, 06:33:03 AM »
Well I have an s14 and I was jus gonna buy them new but one of my friends has some brand new for an s13 and I just wanted to know if they fit it would save me time and money  Grin
Logged
Robert
Ultimate Parking Machine
Moderator
*****
Posts: 1545
« Reply #6 on: February 28, 2011, 02:30:58 PM »
im pretty sure theyre the same.
the only reason you need offset solid bushings for s14 subframe in s13 is because the subframe mounting points are slightly wider on s14s and a solid bushing will not flex to fit like a rubber one.
« Last Edit: March 15, 2011, 02:47:31 PM by Robert » Logged
Nick D
2010 World Champs
Administrator
*****
Posts: 1730



WWW
« Reply #7 on: March 12, 2011, 03:15:01 AM »
I have the SPL s14 offset conversion solid subframe bushings for the 13 and even then it was difficult to get them to line up perfectly.
Logged
Nick D
nick@vegasdrift.com
Facebook
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.16 | SMF © 2011, Simple Machines