the best and worse shops in the city of sin

[DannyGeorge]

Mikey is one of the best tuners in the biz. My plugs looked like new after 5 or so events. I dont know anything else about the shop but pushing the limits with any car/shop things will arrise.

I like trevor at trevtec as well
Get nuts fab work is sick


Its crazy as the time goes the less and less i even use a shop. Doing shit yourself is so fun and after a decent job turns out Pretty good you gain alot of confidence in tyimg more yourself. Saves a ton of cash too.

[ak_slick]

i have a lot of personal experience from insanespeed, i had my sr20det built there, and it made 735whp on low boost DAILY DRIVEN.

What turbo, low boost setting and fuel type? Also what dyno was this on?

[HouseElf]

i have a lot of personal experience from insanespeed, i had my sr20det built there, and it made 735whp on low boost DAILY DRIVEN.

What turbo, low boost setting and fuel type? Also what dyno was this on?

billet 6262, 22psi 603whp, 31psi 735whp while running out of fuel (E85). note this was with out timing on stock ignition. and it was on a dynojet.

[HouseElf]

also my wastegate is 22psi, we will go to 40+ once i get more fuel pump.

[My LS hates me]

i have a lot of personal experience from insanespeed, i had my sr20det built there, and it made 735whp on low boost DAILY DRIVEN.

What turbo, low boost setting and fuel type? Also what dyno was this on?

billet 6262, 22psi 603whp, 31psi 735whp while running out of fuel (E85). note this was with out timing on stock ignition. and it was on a dynojet.

I think you need to start a build thread to help us understand what kind of setup you have...

[HouseElf]

http://zilvia.net/f/chat/330549-big-power-sr23det-s14-build-thread.html

[ak_slick]

It is an sr23... it all makes sense now.

[s13slideways]

Insane speed tuned my car also at 300 HP  10 Psi. Super dependable tune so far and very crisp response. car starts up evertime. Mikey did a good job and will be getting hold of them soon for a minor retune since new upgradings to reach 380 range at 21 psi. No complaints here so far.